WHAT TO DO IF YOUR WATER HEATER UNEXPECTEDLY STOPS WORKING

What To Do If Your Water Heater Unexpectedly Stops Working

What To Do If Your Water Heater Unexpectedly Stops Working

Blog Article

Source This Article

In this article in the next paragraph yow will discover a bunch of extremely good answers related to What Would Cause My Electric Water Heater to Stop Working?.


What Would Cause My Electric Water Heater to Stop Working?
Numerous contemporary residences take advantage of an electric water heater for their heating unit, because of its comfort and also convenience of use. However, just like any other electrical home appliances, issues might develop with its use, all of a sudden. It can be actually frustrating to awaken to a cold shower instead of a hot one or having your bath with water that isn't hot enough or even as well hot. Whatever the instance might be, water heater problems can be rather stressful. The good news is, we have actually made a checklist of possible services to your water heater problems. There are a variety of aspects that can trigger much of these troubles, it could be an issue with the power supply, the electrical burner, or the thermostat. Prior to doing anything, guarantee you turn off the main power supply for security. Whatever the issue is, getting it dealt with should not posture way too much of a concern if you adhere to these actions:

Call An Expert:


If after replacing all faulty parts and also resetting your temperature level, the hot water heater still isn't working, you may need to speak to a professional plumber for an expert opinion. The problem with your heater could be that the hot and cold faucets have actually been switched over or it might be undersized for the quantity of hot water needed in your home. Whatever the case might be, a specialist plumber would certainly assist fix the issue.

Check Your Power Supply:


As basic as this might appear, it is really needed. Without sufficient power, your water heater will not operate. So the first thing to do when your water instantly retires is to verify that it isn't a power problem. Check if the fuse is burnt out or the breaker tripped. If the circuit breaker is the concern, merely transform it off and on again. Change any type of busted or damaged fuse. Check the home appliance with power after these modifications to see if it's now working.

Examine Your Thermostat:


If your hot water heater still isn't functioning or the water coming out isn't hot enough, you might require to inspect the temperature settings on your top thermostat. Make certain the breaker is switched off before doing anything. Open up the accessibility panel as well as press the red button for temperature reset over the thermostat. This must assist heat the water. Turn the breaker back on as well as inspect if the problem has actually been solved.

Inspect the Heating Element in the Hot Water Heater:


If it's not a power trouble, then try looking into your burner if it is still working. Check each of your burner to make sure the trouble isn't with any of them. If any one of them is faulty, change that part and after that examine whether the hot water is back on.

Final thought


Water heater issues are not constantly significant. A number of them are due to minor issues like a blown fuse or worn-out burner. Replacing the damaged parts need to work. Nonetheless, if you are still not able to address the trouble, give a call to your closest plumber ahead to get it repaired.


8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


How to Troubleshoot and Repair an Electric Water Heater

Hopefully you liked our post about Hot Water Heater Repair. Many thanks for spending some time to read through our article post. Are you aware of anybody else who is in the market for What Would Cause My Electric Water Heater to Stop Working?? Be sure promote it. Thank-you for going through it.




Request An Appointment

Report this page